Product Index

All Mitsubishi products are Cooling / Heat Pump.

SRK-HG Wall Mounted Split System (low cost, fixed speed) - (2007/2008 brochure)

Air Conditioners and Heat Pumps for Residential & Light Commercial Applications. Units have a 'smooth line' design fascia, this unit has a lower profile flatter appearance, and is very easy to keep clean.

SRK Wall Mounted Inverter Split System - (2007/2008 brochure)

Split system with high wall mounted indoor unit, complete with wireless controller. The units are high efficiency, and have variable capacity, automatically adjusting to part load conditions and providing energy saving.

SCM Inverter Multi Systems - (2007/2008 brochure)

Multi-Split system with one outdoor unit connected to 2, 3 or 4 indoor units, depending on the size. This enables several rooms to be controlled at one time, in either cooling operation or heating operation. The indoor unit selection includes high wall mounted, compact cassette (ceiling recessed) or ducted (concealed, in a ceiling or horizontally at high level). The indoor units can be individually switched on/off as required.

FDT Cassette Recessed Systems - (2008/2009 brochure,  2007/2008 brochure)

The Cassette indoor units are extremely popular for many commercial environments. The decorative fascia panel is on view, with the chassis part of the unit concealed above the ceiling. FDTC is the ’compact’ version, suitable for a 600 x 600 suspended ceiling grid.

FDKVA Wall Systems - (2007/2008 brochure)

High wall mounted units with full specification – including wired controller (which has a 7-day programmable timer) and extended pipe runs between indoor and outdoor units.

FDE Under Ceiling Mounted Systems - (2008/2009 brochure,  2007/2008 brochure)

Under Ceiling indoor units are normally suspended below the ceiling, and preferable near and adjacent wall where pipe connections can be routed and concealed. The smaller indoor units are only 210mm in height, and provide a solution where there is no suspended ceiling.

FDUM Ducted Systems - (2008/2009 brochure,  2007/2008 brochure)

This new range of horizontal ducted units includes circular duct spigots for easy connection to distribution ductwork. The units are of robust construction and all models include a condensate lift pump.

FDU Ducted Systems - (2008/2009 brochure,  2007/2008 brochure)

The Advanced FDU Horizontal Large Ducted System is a high specification product, with energy saving INVERTER technology. These two systems range from 22.4KW to 28.0KW with a high static pressure of up to 200pa.

FDC Inverter Multi Systems - (2008/2009 brochure,  2007/2008 brochure)

These systems range from 8.0 to 28kW cooling, and allows 2, 3, or 4 indoor units to be connected to one outdoor unit. All units operate in the same mode at the same time – ideal for large open plan areas, shops, gyms, showrooms, and conference rooms.

FDC 112-155 Mini VRF KX6 - (2008/2009 brochure,  2007/2008 brochure)

TThis versatile system allows individual control from 2~8 (depending on system design), each able to operate independently, with variable capacity, and with high efficiency.

KX4 & KXR4 VRF Inverter Multi System - (2007/2008 brochure)

Large modular systems for multi indoor unit application, providing individual control of cooling and/or heating, with variable capacity control for part load conditions, and energy recovery (KXR) between warm and cool areas of the building. Ideal for office buildings, hotels, large stores, etc.